Home > Test Probe,Test Finger,Test Pins

UL 1278 Figure 8.4 Articulate Probe SA1788A

UL 1278 Figure 8.4 Articul

UL 1278 Figure 8.4 Articulate Probe SA1788A...

UL 60950-1 Figure 2B Test Pin S2962D

UL 60950-1 Figure 2B Test

This pin probe is intended to verify the protection against ...

UL 60950-1 Figure 2C Test Probe SM430E

UL 60950-1 Figure 2C Test

Telecom Test Probe meets UL 60950-1 Figure 2C and UL6500 Fig...

IEC 62368-1 Figure V.4 Wedge Probe for Document Shredders Test

IEC 62368-1 Figure V.4 Wed

This product is used for testing access to document shredder...

UL 1703 Figure 15.1 Test Probe for Determining Accessibility of Live Parts PA120-1

UL 1703 Figure 15.1 Test P

UL 1703 Figure 15.1 Test Probe for Determining Accessibility...

Test Probe C with Cable

Test Probe C with Cable

Test Probe C is the necessary tool to proceed protecting ele...

4mm Diameter, 100mm Long Test Pin with Cable

4mm Diameter, 100mm Long T

The apparatus shall be so designed that suspended foreign bo...

3mm Diameter, 100mm Long Test Pin with Cable

3mm Diameter, 100mm Long T

Diameter: 3mm , length: 100mm . Used to verify protection ag...

Test Probe 13 with Cable

Test Probe 13 with Cable

This pin probe is intended to verify the protection against ...

Test Probe 11 with Cable

Test Probe 11 with Cable

The Rigid Test Finger is a precision test probe made accordi...

Test Probe D with Cable

Test Probe D with Cable

Straight Test Probe ( Test Probe D) is the necessary tool to...

UL749 Fig.4 SB0504A Knife Probe

UL749 Fig.4 SB0504A Knife

According to standard UL 749 Figure 4 Knife Probe(SB0504A). ...

76mm Flat End Test Rod of IEC 60335-2-16

76mm Flat End Test Rod of

Conform to the IEC 60335-2-16 clause 22.102. Used to tes...

UL 1278 Figure 10.2 Bar Probe SM207

UL 1278 Figure 10.2 Bar Pr

Conform to the UL 1278 Fig 10.2. The handle is made of nylon...

Arm Probe for Testing Tortuous Path Guarding of Cutting Means Through the Feed Intake Opening

Arm Probe for Testing Tort

The adult arm probe conforms to EN 50636-2-100 figure 2 and ...

CSA C22.2 No.12 Figure 1 Articulate Probe

CSA C22.2 No.12 Figure 1 A

Conform to the CSA C22.2. Handle is nylon, tip is stainless ...

IEC 60335-1 Test Probe Kits

IEC 60335-1 Test Probe Kit

Meets IEC 60335-1. Accessibility probes are used to test the...

Test Probe 17 of IEC 61032 (Dia 0.5 mm Test Wire)

Test Probe 17 of IEC 61032

This Test Wire is intended to verify protection against acce...

Test Probe 14 of IEC 61032 Figure 10 (Test Bar)

Test Probe 14 of IEC 61032

Test Probe 14 is intended to verify the protection against a...

0.5 inch Steel Ball of UL (12.7mm Steel Ball)

0.5 inch Steel Ball of UL

1/2" 0.5 inch Steel Ball of UL (12.7mm Steel Ball)...

6mm Steel Ball of IEC 60745-1

6mm Steel Ball of IEC 6074

Steel Ball 6mm diameter as per IEC 60745-1 Sub-clause 21.37....

UL 60950-1 Test Probe Kits

UL 60950-1 Test Probe Kits

Meets UL 60950-1 Accessibility probes are used to test the s...

Jointed Test Finger of GR 1089

Jointed Test Finger of GR

The Jointed Test Finger is a precision test probe made accor...

Test Probe Pins of IEC 61032 Intended to Verify The Protection of Persons Against Access to Hazardous Parts

Test Probe Pins of IEC 610

This probes is intended to verify the protection of persons ...

« 12345 ... 7 »
close
Scan the qr codeClose
the qr code