Test Probe 14 of IEC 61032

Test Probe 14 is intended to verify the protection against a...

Clearances Creepage Distan

The Gauges Set measures creepage and clearance distances, di...

1 ~ 10 mm Creepage / Clear

The Gauges Set measures creepage and clearance distances, di...

0.5 inch Steel Ball of UL

1/2" 0.5 inch Steel Ball of UL (12.7mm Steel Ball)...

6mm Steel Ball of IEC 6074

Steel Ball 6mm diameter as per IEC 60745-1 Sub-clause 21.37....

EN 60360 Figure 5 - E27/51

According to standard EN 60360 / IEC 60360 figures 5, used t...

EN 60360 Figure 3 - E14/20

According to standard EN 60360 / IEC 60360 figures 3, used t...

UL 498 2012 Plugs and Rece

UL 498 Plugs and Socket Outlets Gauge. According to stand...

Abrasion Resistance Tester

Abrasion Resistance Tester according to IEC 60950 figure 2K ...

UL 60950-1 Test Probe Kits

Meets UL 60950-1 Accessibility probes are used to test the s...

BS 546 Figure 5 Minimum GO

BRITISH STANDARD 546 Fig.5. Minimum 'Go' Gauge for Socket-ou...

IEC 60068-2-75 Figure A.5

IEC 60068-2-75 Figure A.5 20J Vertical Hammers for IK10 Test...

IEC60068-2-75 Figure A.4 1

IEC60068-2-75 Figure A.4 10J Vertical Hammers for IK09 Test ...

IEC60068-2-75 Figure A.3 5

IEC60068-2-75 Figure A.3 5J Vertical Hammers for IK08 Test E...

Circular Plane Surface 30

External ENCLOSURES are subjected to a steady force of 250 N...

IEC 60238 Figure 5 Torque

IEC 60238 Figure 5 Torque Test Caps of E14. According to ...

UL 498 Figure 118.1 Recept

UL 498 Figure 118.1 Receptacle Test Fixture SB1276A. Acco...

VDE0620-1 Lehre 17 Gauge f

VDE0620-1 Lehre 17 - gauge (thickness: about 2 mm) to examin...

BS 1363-2 Figure 12 Contac

BS 1363-2 Figure 12 - Contact Test Gauge According to sta...

7006-29M-1 E26d Gauge for

7006-29M-1 E26d Gauge for Testing Unacceptable Contact-Makin...

AS/NZS 3112 Figure F1 Gaug

AS/NZS 3112 Figure F1 Gauge for Flat and Round Pin Plugs. ...

AS/NZS 3112 Figure B1 Gaug

AS/NZS 3112 Figure B1 Gauge for Two-Pin Flat-Pin 125 V Max. ...

AS/NZS 3112 Figure A1 Gaug

AS/NZS 3112 Figure A1 Gauge for Three-Pin 250 V Max Flat-Pin...

AS/NZS 3112 Figure 3.7 Dev

AS/NZS 3112 Figure 3.7 Device for Checking The Resistance to...