Home > TAGS

  • UL1278 Fig.10.3 SM208 Triangle Probe

    It conforms to standard requirement of UL1278 Fig 10.3. The handle is made of nylon and the probe is made of stainless steel.

  • Test Finger Nail with 50N Force of IEC60335

    Test Finger Nail meets the standard requirements of IEC60335 UL1025 UL1278 UL507. The Test Finger Nail is a wide range of probes to meet the most common standards including those from IEC, EN, UL, GB,

  • UL1278 Fig.10.1 SM206 Cone Probe

    This probe conforms to the standard requirement of UL1278 Fig 10.1. The handle is made of nylon while the probe is made of stainless steel.

  • PA130A Uninsulated Live Parts Probe of UL1278 Fig 8.1

    UL Rigid test finger 130A meets the standard requirements of UL 507&UL 1287, used for simulating fingers and appliances. It is mainly used for checking whether the live parts are touched. Mainly used

  • PA140A UL Enameled Wire Probe of UL1278

    The probe is used for the enamel wire, shall be applied to any depth that the opening will permit and shall be rotated or angled before, during, and after insertion through the opening to any position

  • PA160 UL Hazardous Moving Parts Probe of UL1278

    The rotor of a motor, a pulley, a belt, a gear, a fan, or other moving parts shall be enclosed or guarded to reduce the risk of injury to persons.

  • SM209 UL Rod Probe of UL1278

    It conforms to standard requirement of UL1278 Fig 10.4. The handle is made of nylon and the probe is made of hard steel.

close
Scan the qr codeClose
the qr code