Technical Articles

The All Products Corresponding Standard

Description Standards
Jointed Test Finger IEC/CEI EN 61032
IEC/CEI EN 60884-1
IEC/CEI EN 60529
CEI 23-50
Jointed Test Finger With Lenght Of 100 mm IEC/CEI EN 60335-2-64
Jointed Test Finger with Insulated Part and Dynamometric Handgrip with and Reference Marks To Forces of 10-20-30-40-50 N IEC/CEI EN 61032
IEC/CEI EN 60884-1
IEC/CEI EN 60529
CEI 23-50
IEC/CEI EN 60335-1
Jointed Test Finger With Insulated Disc ø 125 mm IEC/CEI EN 60335-2-14
Jointed Test Finger With Insulated Cylinder ø 50 mm IEC/CEI EN 60335-1
Unjointed Test Finger with Insulated Part and Dynamometric Handgrip with and Reference Marks To Forces of 10-20-30-40-50 N IEC/CEI EN 60950
IEC/CEI EN 60335-1
Unjointed Test Finger with Dynamometric Handgrip and Reference Marks to Forces Of 10-20-30-40-50 N IEC/CEI EN 60065
IEC/CEI EN 61032
Unjointed Test Finger With Dynamometric Handgrip and Reference Marks To Forces Of 10-20-30-40-50-75 N IEC/CEI EN 60065
IEC/CEI EN 61995-1
IEC/CEI EN 61032
Short Taper Test Pin ø 3 To 4 Mm – Length 15 mm IEC/CEI EN 60601-1
IEC/CEI EN 61032
IEC/CEI EN 60335-1
Test Cone IEC/CEI EN 61032
IEC/CEI EN 60335-1
Gauge ø 1 mm, Force Of 1 N, for Checking Non-Accessibility Of Live Parts IEC 62196-1
IEC/CEI EN 60884-1
CEI 23-50
Gauge ø 2,5 mm, Force Of 3 N, For Checking Non-Accessibility Of Live Parts IEC 62196-1
IEC/CEI EN 60884-1
CEI 23-50
Test Sphere ø 50 mm with Handle and Contact Cable IEC/CEI EN 61032
IEC/CEI EN 60529
Test Finger Nail IEC/CEI EN 60335-1
Test Rod ø 2,5 mm, Length 100 mm, With Stop Sphere ø 35 mm and Contact Cable IEC/CEI EN 61032
IEC/CEI EN 60529
Test Rod ø 1 mm, Length 100 mm, with Stop Sphere ø 35 mm and Contact Cable IEC/CEI EN 61032
IEC/CEI EN 60529
Test Probe ø 12 mm, Length 80 mm with Dynamometric Handgrip and Reference Marks To Forces Of 10-20-30-40-50 N IEC/CEI EN 60950
IEC/CEI EN 61010-1
Small Finger Probe ø 8,6 mm EN 71-1
IEC/CEI EN 60335-2-75
IEC/CEI EN 61032
Small Finger Probe ø 5,6 mm IEC/CEI EN 60601-1-11
EN 71-1
IEC/CEI EN 60335-2-75
IEC/CEI EN 61032
Flat Gauge From 3x1 mm, Force Of 20 N, for Checking Non-Accessibility Of Live Parts IEC 62196-1
IEC/CEI EN 60884-1
CEI 23-50
Test Pin ø 1 mm, Length 20 mm UL 6500
BS 1363-2
IEC/CEI EN 60065
BS 1363-1
Long Test Pin ø 4 mm, Length 50 mm IEC/CEI EN 60335-2-6
IEC/CEI EN 61032
TEST PROBE Ø 12,7 mm, Length 80 mm with Dynamometric Handgrip And Reference Marks To Forces Of 50-60-70-80-90-100 N UL 197
Test Knife with Dynamometric Handgrip And Reference Marks To Forces Of 5 Pounds UL 244 A
UL 749
Test Probe for Food Waste Disposal Units IEC/CEI EN 61032
“UL” Jointed Test Finger UL 60950
UL 1083
UL 982
UL 73
UL 873
Test Probe for Fan Blades CSA C22.2 No. 113-08
UL 471
Test Probe ø 9,5 mm, Length 101,6 mm for Accessibility Determination UL 471
Test Probe ø 12,7 mm, Length 101,6 mm for Film-Coated Wire UL 325
UL 484
CSA C22.2 No. 195
UL 471
Test Hook UL 6500
IEC/CEI EN 60601-1
Wedge Probe IEC/CEI EN 60950
UL 60950
Test Probe ø 6,4 mm for Hand-Supported Enclosure UL 763
Test Pin Dia. 4x100 mm for Accessibility Tests IEC/CEI EN 61010-1
Test Probe for Uninsulated Live Parts UL 325
UL 507
Test Probe ø 75 mm with An Hemispherical End IEC/CEI EN 60335-2-6
Test Probe To Verify The Accessibility On Flatirons UL 1005
Test Rod Diam. 8 mm, Length 150 mm IEC/CEI EN 60335-2-64
IEC/CEI EN 60335-2-14
Test Probe ø 40 mm with An Hemispherical End IEC/CEI EN 60335-2-54
IEC/CEI EN 60335-2-64
IEC/CEI EN 60335-2-14
Small Test Probe UL 498
Large Test Probe UL 498
Probe Intended for Use With Lamp Rated 600 V. or Less UL 496
Test Bar From 50x5 mm IEC/CEI EN 61032
Test Rod ø 0,5 mm, Length 90 mm IEC/CEI EN 61032
Test Rod ø 25 mm, Length 150 mm IEC/CEI EN 61032
Test Probe ø 100 mm with An Hemispherical End IEC/CEI EN 60335-2-27
Probe Intended for Use With Lampholder Rated Between 600 V. and 1000 V. UL 496
CSA C22.2 N° 43-08
Puncture Probe UL 325
Probe for Table Mounted and Handheld Appliances ø 6,3 mm CSA C22.2.195
Probe for Table Mounted and Handheld Appliances ø 12,5 mm CSA C22.2.195
Test Cone UL 1278
Test Rod for Interlock Concealment IEC/CEI EN 60335-2-25
IEC/CEI EN 60335-2-90
Impact Test Apparatus IEC/CEI EN 60335-2-92
IEC/CEI EN 60335-2-107
IEC/CEI EN 60335-2-67
Ball Pressure Test Device IEC/CEI EN 60335-10-2
IEC/CEI EN 60309-1
CEI 23-50
IEC/CEI EN 60669-1
IEC/CEI EN 60884-1
CEI EN 50083-1
IEC/CEI EN 60335-1
IEC/CEI EN 60320-1
IEC/CEI EN 60598-1
Glow Wire Test Apparatus IEC/CEI EN 60695-2-10
Needle Flame Test Apparatus IEC/CEI EN 60695-2-2
IEC/CEI EN 60695-11-5
Tracking Test Apparatus IEC/CEI EN 60112
Steel Sphere Diam. 50 mm for Impact Test IEC/CEI EN 60950
IEC/CEI EN 60335-2-91
IEC/CEI EN 60335-2-90
IEC/CEI EN 60439-4
Steel Sphere Diam. 50,8 mm for Impact Test IEC/CEI EN 60335-2-69
IEC/CEI EN 60335-2-72
IEC/CEI EN 60335-2-68
IEC/CEI EN 60335-2-67
UL 325
Steel Sphere Diam. 40 mm for Impact Test IEC 61721
Steel Sphere Diam. 75 mm for Accessibility Test IEC/CEI EN 60335-2-24
IEC/CEI EN 60335-2-89
Steel Sphere Diam. 100 mm for Impact Test EN 356
IEC/CEI EN 60335-2-91
Dielectric Strength Test Instrument IEC/CEI EN 60065
Hand-Held Device to Verify Protection Against Spraying and Splashing Water (Spray Nozzle) – IPX3 and IPX4 Degrees ISO 26053
DIN 40050
IEC/CEI EN 60529
IEC/CEI EN 60068-2-18
Test Device To Verify Protection Against Water Jets (Hose Nozzles) – IPX5 and IPX6 Degrees ISO 26053
DIN 40050
IEC/CEI EN 60529
IEC/CEI EN 60068-2-18
Test Device To Verify Protection Against Spraying and Splashing Water (Oscillating Tube) – IPX3 and IPX4 Degrees ISO 26053
DIN 40050
IEC/CEI EN 60529
IEC/CEI EN 60068-2-18
Load for Testing Rotating Spits IEC/CEI EN 60335-2-9
IEC/CEI EN 60335-2-6
Test Corner for Heating Test IEC/CEI EN 61010-1
IEC/CEI EN 60335-1
UNI CIG 7166
IEC/CEI EN 60601-1
EN 613
EN 30-1-1
Pans for Testing On Gas Burners EN 30-1-1
Foot Probe UNI EN 836
IEC/CEI EN 60335-2-2
DIN 1856
EN 13684

CATEGORIES

CONTACT US

Contact: Nina She

Phone: +86-13751010017

E-mail: sales@china-gauges.com

Add: 1F Junfeng Building, Gongle, Xixiang, Baoan District, Shenzhen, Guangdong, China

Scan the qr codeclose
the qr code