Home > Technical Articles

List and Figure for Zhaga Book 5 and Book 8

[Book 5] Section Purpose Figure
H-H5a/b A.2.1.2 To check the lock tab mating feature on the holder, dimension H5 minimum Figure A-1 & A-2 & A-3
M-LT2 A.2.1.3 Gauge with collar features to test compressed state dimensions Figure A-4
M-LT1 A.2.1.4 To check LED module locking tab and module body maximum diameter Figure A-5
H-K01 A.2.1.5 To check holder hole locations and keep out zones Figure A-6 & A-7
M-EK01 A.2.1.6 To check LED module electrical keep out zone Figure A-8
M-0D1 A.2.1.7 To check maximum diameter of module with integrated optics Figure A-9
[Book 8] Section Purpose Figure & Table
MTG-B1-PHJ85d-1 8.1.1.1 To verify the Maximum Material Condition of the LLE dimensions
(radial and tangential)
Figure 8-1 & Table 8-1
MTG-B1-PHJ85d-2 Figure 8-2 & Table 8-1
MTG-B3a-PHJ85d 8.1.1.2 To verify the Maximum Material Condition of the LLE dimensions (axially) Figure 8-3 & Table 8-2
MTG-B3b-PHJ85d Figure 8-4 & Table 8-2
MTG-B3c-PHJ85d Figure 8-5 & Table 8-2
MTG-B3d-PHJ85d Figure 8-6 & Table 8-2
MTG-B4-PHJ85d-1 8.1.1.3 To verify the contact making and Keying functionality Figure 8-7 & Table 8-3
MTG-B5-PHJ85d-2 Figure 8-8 & Table 8-3
MTG-H1-PHJ85d 8.2.1.1 To verify the Maximum Material Condition of the Luminaire dimensions Figure 8-14 & Table 8-6
MTG-H2-PHJ85d Figure 8-15 & Table 8-6
MTG-H3-PHJ85d Figure 8-16 & Table 8-6
MTG-H4-PHJ85d-1 8.2.1.2 To verify the contact making and Keying functionality Figure 8-17 & Table 8-7
MTG-H5-PHJ85d-2 Figure 8-18 & Table 8-7
close
Scan the qr codeClose
the qr code