Home > Technical Articles

IEC60320 Gauge for Plug & Pin List

Application:

Chuangxin Instruments offers a wide range of gauge to meet the most common standards including those from IEC, EN, UL, GB,DIN,VDE and others. Such standards require the checking of size & definition etc. these gauges are constructed from senior stainless steel and appropriate steel with a hardness of at least 60 HRC and a roughness according to standard require. Each gauge is supplied with a certificate of calibration.


Conforms To:
IEC60320


Specification:

Standard
Product Name
IEC60320-1-Figure 2 "Go" gauge for connectors to standard sheet C1
IEC60320-1- Figure4 "Go" gauge for connectors to standard sheet C5
IEC60320-1- Figure5 "Go" gauge for connectors to standard sheet C7
IEC60320-1- Figure5A "Go" gauge for side-entry connectors to standard sheet C7
IEC60320-1- Figure6 "Not Go" gauge for connectors to standard sheet C1
IEC60320-1- Figure7 "Not Go" gauge for connectors to standard sheet C1,C5 and C7
IEC60320-1- Figure8 "Not Go" gauge for connectors to standard sheet C1 and C7
IEC60320-1- Figure9 "Not Go" gauge for appliance inlets to standard sheet C8,C8A and C8B
IEC60320-1- Figure9A "Go" gauge for connectors to standard sheet C9
IEC60320-1- Figure9B "Not Go" gauge for connectors to standard sheet C9
IEC60320-1- Figure9C "Go" gauge for appliance inlets to standard sheet C10
IEC60320-1- Figure9F "Go" gauge for connectors to standard sheet C13
IEC60320-1- Figure9G "Not Go" gauge for connectors to standard sheet C13 and C17
IEC60320-1- Figure 9H "Go" gauge for appliance inlets to standard sheets C14, C16 AND C18
IEC60320-1- Figure 9J "Go" gauge for connectors to standard sheet C15
IEC60320-1- Figure 9K "Go" gauge for connectors to standard sheet C17
IEC60320-1- Figure 9L "Go" gauge for connectors to standard sheet C19
IEC60320-1- Figure 9M "Go" gauge for appliance inlets to standard sheet C20 and C24
IEC60320-1- Figure 9N "Go" gauge for connectors to standard sheet C21
IEC60320-1- Figure 9P "Go" gauge for appliance inlets to standard sheet C22
IEC60320-1- Figure 9Q "Go" gauge for appliance inlets to standard sheet C23
IEC60320-1- Figure 9R "Not Go" gauge for connectors to standard sheet C13,C15 and C17
IEC60320-1- Figure 9S "Go" gauge for connectors to standard sheet C15A
IEC60320-1- Figure 9T "Go" gauge for appliance inlets to standard sheet C16A
IEC60320-1- Figure 22 Blades for checking the resisitance against deformation of the front part of the connector to standard sheet C7
IEC60320-1- Figure 27 Gauges for checking the distance form the engagement face of connectors to the point of first contact
close
Scan the qr codeClose
the qr code